AUTONET TV

Putting a Stop to Brake Problems (Brake Service)

It's safe to say that most drivers take their brakes for granted.  You press on the brake pedal and the vehicle slows down or stops.  It's easy to see why it is so important for your vehicle's brakes to be working correctly.  Brakes are an important safety feature of any vehicle.

When it comes to your brakes working correctly, maintaining them regularly will ensure that you will always be able to slow or stop your vehicle in any situation, whether on a sunny day on dry pavement or a bad weather day on slippery surfaces.  And that is why regular brake service is such a sound investment for all drivers. The combo of brakes" and "surprises" doesn't usually end well.

You might already know about some of the parts of your braking system.  Terms familiar to you might be pads, rotors, and calipers. In short, the calipers press the pads, which in turn contact the rotors.  The resulting friction slows your vehicle.  Another type of brake uses a drum and brake shoes.  But both count on friction to work.

When you come in to have us check your brakes, we'll make sure those parts are all in good working together and meet the specifications of your vehicle manufacturer.  But there are other important components as well.  Your brake system has several parts of a hydraulic system that uses fluids to conduct the pressure you put on the brake pedal to the brakes on all of your wheels.  There are hoses and lines that can sometimes degrade because of road salt or debris.  

Last and not least, your vehicle has an emergency or parking brake. It's something you'll need to prevent your vehicle from rolling when you park on a steep incline. Your parking brake also is an important backup if your hydraulic brakes fail.  

Give your brakes some tender loving care with regular service and they'll be there when you need them.

Hill's Auto Repair, Inc.
22829 colton point rd
Bushwood, Maryland 20618
301-769-2400

A Bright Spark (Ignition Coil Replacement)

Ever wonder how your vehicle’s engine is able to take the 12-volts from its battery and ramp that up to as high as the tens of thousands of volts it takes to fire its spark plugs? The secret is something called an ignition coil.  Most newer vehicles have an ignition coil at each cylinder, but older ones have a coil that serves all of the spark plugs. 

There are telltale signs that you have an ignition coil problem.  As you might expect, one symptom is it’s hard to start your engine or it won’t start at all.  If your engine is misfiring or not running smoothly or you see the Check Engine light come on, those all could point to an ignition coil failure.

Several things can contribute to ignition coil trouble in addition to normal wear and tear. Moisture and dirt may have gotten inside the coil, plus the heat and vibration of your engine over time can contribute to them going bad.  Bad spark plugs or plug wires can also be a cause.  

While ignition coils can last 100,000 miles/160,000 km, depending on how you drive and in what conditions.  If you start noticing some of the signs and symptoms just described, it’s a good idea to schedule a visit to see us so a technician can diagnose what’s wrong. Driving too long with an engine misfiring can damage your catalytic converter, and that can be expensive to replace.

A technician will thoroughly check your ignition system and determine where the failure is.  If it’s only one coil that’s bad, it may be the only thing that will need replacing.  If your vehicle has a distributor, it may also need to be replaced.  Properly-working ignition coils will help your vehicle operate at its best and help prevent future engine damage.

Hill's Auto Repair, Inc.
22829 colton point rd
Bushwood, Maryland 20618
301-769-2400

Motor Oil?The Synthetic Advantage (Synthetic oil vs Conventional)

You’ve probably already heard that regular oil changes are extremely important for the health of your vehicle’s engine. That’s sound advice.  But what you might not know is when it comes to motor oil, the real thing may not be the best thing for your engine.

There are different types of motor oil:
•    Conventional oil, extracted from the ground and refined.
•    Synthetic oil, manufactured from high-quality base oils and artificially-made chemical compounds.
•    Synthetic oil blend, a mixture of conventional and synthetic oils.

The first thing you need to know is that most new engines require synthetic oil.  If synthetic oil is recommended for your car – you MUST use it.

For the rest, there are many advantages to using synthetic oil over conventional oil. 

•    Synthetic oil provides better protection for your engine while helping it to perform better.
•    Conventional oil breaks down over time, while synthetic oil lasts longer.
•    Synthetics can stand higher temperature extremes, both heat, and cold.

Synthetic oil can be a better choice if you live in an extremely hot or cold climate or put a lot of strain on your engine by towing or carrying heavy loads.  It also may be good for older engines that sometimes have a tendency to develop sludge. 

Synthetic oil is a more expensive option, but you likely won’t have to have your oil changed as often.  Some synthetics are recommended to last 10,000-15,000 miles/16,000-24,000 km between changes. 

You might also consider a synthetic blend that gives you some of the advantages of synthetic oil at a lower cost. Have a talk with your service adviser about recommendations for what will best suit your vehicle and driving habits. 

It’s interesting to note that in recent years, more than one out of two vehicle owners are opting for synthetic oil or a synthetic blend when they get their oil changed. Sounds like they’re on to something. In the long run, if you have fewer oil changes with synthetics, you’ll use less oil, a bonus for our environment. 

Hill's Auto Repair, Inc.
22829 colton point rd
Bushwood, Maryland 20618
301-769-2400

Making Sense of the O2 Sensor (Oxygen Sensor Replacement)

As you know, today’s vehicles rely on a lot of computers in them to keep them running clean and efficiently.  Those computers depend on information delivered by several sensors throughout the engine and exhaust system.  And one of the most important is the oxygen sensor.  

Known as the O2 sensor for short, it looks for too much unburned oxygen that has made it into the exhaust. That signals something isn’t right with the engine’s air-fuel mixture.  The sensor sends signals to the engine’s computers, which can then make adjustments to make sure the engine is running as it was designed to.

Some vehicles can have several O2 sensors, and since they can measure oxygen at various points in the combustion/exhaust process, the computers can pinpoint where the problems lie.  For example, an O2 sensor can detect how much oxygen is coming out of the engine’s combustion chamber, and another one can measure oxygen coming out of the catalytic converter.

As you can see, it’s important that those O2 sensors are working correctly.  If they’re not, the computer is getting bad information.  Garbage in, garbage out. That can result in lousy fuel economy and excess pollution coming out of your tailpipe. It can also affect your vehicle’s performance.  Sometimes your Check Engine light will illuminate when one of your O2 sensors goes bad.  Or you may notice your engine misfiring or idling roughly. 

If you notice any of these symptoms, bring your vehicle on in, and a technician will pinpoint the trouble spot.  

Hill's Auto Repair, Inc.
22829 colton point rd
Bushwood, Maryland 20618
301-769-2400

Why did my vehicle fail its emissions test?

We all want to breathe clean air and keep our planet green.  One of the ways to do that is by requiring all vehicles with internal combustion engines to pass an emissions test.  That’s because these vehicles can be big polluters.  

Everyone wants their car to pass the test so they can continue their day-to-day driving routine.  But then comes that one day when they tell you your vehicle has failed.  Why does that happen?

One of the most common reasons is that your gas cap is leaking or loose (or maybe you don’t even have one on your vehicle!).  The gas cap is supposed to seal in vapors, but sometimes its seals or gaskets dry out or crack. Replace it, and you’re good to go.

Another common reason your vehicle failed the test is that your catalytic converter isn’t doing its job. It is supposed to convert toxic gases from your engine into ones that don’t pollute the air.  There are many reasons the catalytic converter may not be working.  It may be physically damaged, or the steady flow of exhaust gases has fouled the converter. 

You may have a bad oxygen sensor. It’s supposed to measure how much oxygen is in your exhaust.  This can cause the air-fuel mixture to be too rich, resulting in too many hydrocarbons in the exhaust. Your ignition system may also have problems, such as worn-out spark plugs.  Dirty fuel injectors can contribute to excess emissions.

Believe it or not, a dirty engine air filter may be the culprit. If it hasn’t been replaced for a while, your vehicle may be emitting too many hydrocarbons -  something that will cause your vehicle to fail the emissions test.

You can usually avoid a failed emissions test by maintaining your vehicle regularly.  The best way to do that is by bringing it to our trained technicians, so your vehicle gets the service it needs, scheduled and non-scheduled.  Plus, you’ll be doing your part to keep our air clean.

Hill's Auto Repair, Inc.
22829 colton point rd
Bushwood, Maryland 20618
301-769-2400