AUTONET TV

Them's the Brakes (Brake Rotor Resurfacing)

Your vehicle's brakes wear out.  It's inevitable. You'll notice it when you step on the brake pedal and feel it harder to stop, or there's vibration when you are braking. 

Most modern vehicles have disc brakes that each use a brake pad that press on a disc (disc brakes!) called a rotor.  The friction between them enables you to stop, and each time you do a little bit of the pad and the rotor wears down.

The original brakes on vehicles used a rotor that was thick enough to last through at least two replacements of the pads.  But vehicle manufacturers who want to save costs and weight now make them thinner, and sometimes the rotors have to be replaced after the first pad replacement.  But not always.

Vehicle manufacturers specify a minimum thickness to provide safe braking.  Sometimes rather than having to have your rotors replaced, they can be put on a lathe and resurfaced.  In other words, the surfaces of the disc can be slightly shaved off so the surface is flat and doesn't wobble. 

Whenever you bring your vehicle in to have the brakes checked, the technician will measure the thickness of the rotors to see if they can be resurfaced without leaving them too thin for safe braking. If they can, with the right tools and skill, the rotors can be resurfaced.  If not, the rotors should be replaced. 

Discuss the options with your service advisor.  Our service center can recommend replacements that are designed to help stop your vehicle as well as or better than the vehicle's original rotors.

Either way, keep in mind that keeping your brakes in top condition can supply the margin of safety that may one day save your life or the lives of those around you.

Hill's Auto Repair, Inc.
22829 colton point rd
Bushwood, Maryland 20618
301-769-2400

Heat and your Tires (Tire Pressure Monitoring System)

With hotter weather and brutal heat waves becoming more common, the pressure in your vehicle's tires goes up.  After all, heat causes air to expand, and the air in your tires follows the laws of physics. Overinflated tires can reduce your vehicle's traction, cause a hard, punishing ride and make your tires wear out faster; all are important safety issues.

Four out of every ten drivers rarely check tire pressure. Some rely on their vehicle's tire pressure monitoring system (TPMS) to keep an eye on proper tire inflation.  But it's not designed to do that.

TPMS is a safety feature that has been required on vehicles made in 2008 or later, using sensors in the wheels that alert you to tire pressure problems.  That warning can be a light on your dash, a digital message or a readout of the pressure in each individual wheel.  But a study showed that more than 40 percent of drivers don't even know what the tire pressure monitoring light symbol looks like!

One looks like a horseshoe with an exclamation point in the middle.  The other looks like an overhead view of your vehicle with the tires at all four corners.  They may even show the inflation number (usually in pounds per square inch, or PSI).

The TPMS is designed to alert you that your tires aren't inflated within certain parameters, but the system shouldn't be a substitute for frequently having your tires checked with a tire gauge.  A TPMS light is only required to come on when a tire is 25 percent under the recommended tire pressure; by that time, you're driving on an unsafe tire and causing excessive wear.

Have your vehicle checked regularly by our professionals, and that includes tire pressure checks.  If you do see the tire pressure warning come on, have our service center look at it soon.  You may have a tire with a problem or the TPMS system may not be working right. 

Either way, since your tires are the only contact your vehicle has with the road, your safety depends a great deal on your tires being in top shape and correctly inflated.  Keep your tires properly inflated and your TPMS working to alert you of any problems. And that's not just a lot of hot air.   

Hill's Auto Repair, Inc.
22829 colton point rd
Bushwood, Maryland 20618
301-769-2400

Shifty Letters PRNDL (Transmission)

You probably figured out those shifty letters.  They're what you see on your automatic transmission shifter and stand for Park, Reverse, Neutral, Drive and Low.  Your automatic transmission is one of the great automotive inventions; here are some ways you can keep yours working well.

Maintain your transmission regularly.  A technician will check your transmission fluid's level and even its appearance and smell.  If it's dark or has an unusual odor, that could be a sign of trouble.

Change from one transmission direction gear into another only when your vehicle is stopped.  So many drivers want to switch from Reverse to Drive quickly or the other way around.  If you do that when the vehicle is moving, you can damage your automatic transmission.

Keep your vehicle's cooling system in top shape.  What does the cooling system have to do with the transmission? It helps keep the transmission fluid from overheating. 

Follow the manufacturer's recommendations for maintaining your transmission.  Some recommend at least an annual checkup by a trained technician. 

Let your powertrain warm up a little before overtaxing it. Especially in cold weather, don't step on the throttle too aggressively before all components are warmed up.  That way both your engine and transmission will last longer.

Transmissions can be costly to fix.  If you treat your powertrain with respect and regularly maintain it, you'll not only avoid expensive repairs, but you’re also much less likely to find yourself stranded because of a transmission problem. 

Hill's Auto Repair, Inc.
22829 colton point rd
Bushwood, Maryland 20618
301-769-2400

A Clean Start (Battery Cleaning)

Your vehicle is loaded with electrical devices. Computerized components are everywhere, so good electrical connections are important.  Those begin with your vehicle's battery, so it's important that its connections are in top shape.

Ever had a flashlight that didn't work, took out the old batteries to replace them and noticed the old batteries were all corroded? The same thing can happen to your vehicle's battery. 

The battery type used in most vehicles is a lead-acid, which can be very corrosive.  Corrosion can build up around your battery's terminals that can prevent the electrical connection from being as solid as it needs to be.  You may have even seen discoloration around your battery's terminals if you look under the hood, a sign of corrosion.

Or you might notice visible signs of fraying or loose battery cables. All of your vehicle's components are affected by vibrations from the engine and road surface imperfections, and the battery cables take a lot of jostling every time you drive.  Frayed cables won't conduct as much electricity as intact ones.  Plus, there's the possibility that a frayed cable may touch a piece of metal in the engine compartment that can cause shorts and other problems.

There are some signs to watch out for that might tell you if your battery terminals are corroded or your cables aren't making good contact with them.  You might find your vehicle isn't starting as easily as it used to. You also might see the battery warning light illuminated on your dash. That light looks like a rectangle with a "-" and "+" sign inside.

Our technicians can make sure your battery and cables are at optimal operating capability with regular service and cleaning.  A technician will clean the terminals and portions of the cables that are connected to them.  They may also add an anti-corrosion agent to the cables/terminals. Nothing like giving your vehicle a clean start!

Hill's Auto Repair, Inc.
22829 colton point rd
Bushwood, Maryland 20618
301-769-2400